This pump is a horizontal multistage pressure system pump supplied wired and ready to install. Used especially for supplying water to domestic installations for large homes , irrgation applications with long runs, general water transfer.
The pump is characterised by:
- Automatic electronic pump control fitted and wired.
- Automatic electronic control provides run dry protection and constant pressure at low flows. Automatic electronic control has auto restart and in-built check valve.
- Corrosion resistant pump body, diffuser and impeller.
- Mechanical shaft seal.
- Stainless Steel barrel union
- Comes complete with plug and play leads.
- 240V single phase TEFC motor with in-built auto reset thermal overload.
- Flows to 233l/m
- Heads to 49m
Electrical data:
Rated voltage: 240V
Mains frequency: 50 Hz
Rated output: 2200W
Horse Power: 3.0HP
Flow Rate: 233L/m
Taps: 23 taps
Motor duty: Continuous
Motor Type: Asynchronous, TEFC
Motor Protection: In-built thermal overload
Ingress protection: IP 55
Insulation class: F
Power cable length: 1.2 m H07RNF
Pipe connections suction/discharge: 1.5 ” BSP F / 1.25″ BSP M
There are no reviews for this product yet. Please write a review here.
