null
The New Davey Dynadrive Variable Speed Household Pump

The New Davey Dynadrive Variable Speed Household Pump

15th Aug 2019

DynaDrive is the latest all in one home pressure system. Variable speed drive maintains water pressure at a fixed point regardless of an increase or decrease in water demand for your household. The number of taps being used in your home doesn't impact your water pressure or flow, with DynaDrive keeping pressure constant and steady.

The DynaDrive System consists of a pump, pressure tank and a controller to maintain the desired performance.

User Benefits:

  1. Reduced pressure fluctuations when another tap is turned-on
  2. Reduced water hammer effects - smooth flow 
  3. Reduced operating cost: pump only works as hard as required, when required. Not 100% at all times. 
  4. Quiet pump operations 

How does DynaDrive work? 

  • The speed of the motor is increased or decreased in response to demand 
  • The more taps that are being used, the faster the motor revs and thus the water flow increases, which in turn keeps the pressure constant and steady 
  • When the taps are turned off, the motor revs reduce and this also keeps the pressure constant 

DynaDrive - Integrated Controller 

Features:

  • Digital LCD Monitor
  • Safety Alarm
  • Adjustable Settings
  • Auto reset 
  • Option for adapting (volt-free) tank level sensor into programming 
  • Adaptable for daisy-chain multiple pumps in parallel, up to 2 pumps 
  • Adjustable pressure set points via easy to use touchpad in 10 kPa increments 

Benefits: 

  • Easy set-up 
  • Allows user to set desired water pressure 
  • Dry-Run protection 
  • Energy Saving Methods - Reducing default pressure reduces energy consumed by the pump

Safety Features: 

  • Under current visual alarm
  • Over current protection by way of shut down and visual alarm 
  • Data logging of operation controls and alarms
  • Motor and VSD protection from onsite "brown-outs" by way of shut down, visual alarm and auto re-try after correct voltage regained 
  • Protection from motor locked rotor by way of auto shut down, visual alarm and auto re-try after correct voltage regained 
  • Fault diagnosing software for user troubleshooting 
  • 3 minute manual override for priming 

Brand Comparisons: 

BrandDavey DynadriveDab E.syboxGrundfos SCALA2
Pre-Charged Tank8L Pre-Charged to 280kPa 2L Pre-Charged 400ml Expansion Tank 
ApplicationOutdoor/Indoor Application. Rated to IP55Indoor only. Rated to IP44Outdoor/Indoor. Rated to IPX4D
Input Pressure Up to 500kPa input pressureNot higher than 200kpa. Not applicable for pressure boosting From 450 to 550kPa, positive input pressure required
Serviceability Easy to service Difficult to service Difficult to service 
Daisychain Yes, up to 2Yes Yes
Tank Level Sensor (Option) YesNoNo