Replaces BGR100-APC2.2
Self-priming centrifugal jet pump for handling clean water
BGR Series has a robust design with pressed stainless steel casting and an aluminium motor body. The pump is equipped with built-in ejector systems providing suction lift capability. This allows the pump to remain primed if there are gases in the pumped water. All liquid contact components are approved for use in drinking water to AS/NZS 4020.
Specifications:
Delivery: up to 70 LPM
Head: up to 40m
Power supply: single-phase 50Hz
Maximum operating pressure: 4 bar
Maximum total lift: suction lift capable
Maximum ambient temperature: 40çC
Temperature of pumped liquid: -10çC to 65çC
Insulation class: 155 (F)
Protection: IP55
Length of cable: 1.5m
Materials:
Pump body: Stainless steel
Impeller: Noryl
Diffuser: Noryl
Mechanical seal: Cer / Carbon
Fill and drain plugs: Stainless
Elastomers: EPDM
Applications:
Water distribution
Rain-water collection
Lawn and garden sprinkling
Cistern filling
There are no reviews for this product yet. Please write a review here.
