Microlene Poly Pleated Filter Cartridges - 4.5" x 20"

Suits 20" Jumbo Housings (20" x 4.5")

 

Poly Pleated Sediment Filter Cartridges - FOR LARGER SEDIMENT REMOVAL

 

Commonly used in 1st stage of filtration to remove:

 

Sediment

Rust

Scale

Water filters in the range suit  a variety of filter housing sizes.

 

Typically used on whole of house applications,  Suits a variety of filter housings

 

Applications

 

Drinking water, beverage industry, mineral water bottling, laboratory use, food industry, prefiltration ahead of submicron filters or Reverse Osmosis and other industrial applications where low contamination levels are needed.

 

Polyester Pleated cartridges offer practical filtration with the convenience of a cartridge filter and the economy of cleanabilty. High surface area pleated construction means longer run length, high flow rates, high dirt holding ability and low pressure drop, giving the lowest cost per litre filtered. Once the cartridge gets dirty it can be cleaned under a tap or by gentle hosing. Severe cases can be soaked in diluted acid or other cleaners, appropriate to the deposits and then rinsed. Cartridges should be sterilised prior to re-use using bleach. Reusability means that the Polyester Pleated cartridges cost less to use than disposable depth type cartridges as they can be cleaned several times before replacement is required (note: 1 & 5 micron cartridges may only be cleanable

once or twice).