Microlene Polyspun Filter Cartridge - 4.5" x 10"

2.00 KGS
(No reviews yet) Write a Review
Product Code:

10" Jumbo, Polyspun Sediment Cartridges - Maximum flow rate of 35lpm,For finer sediment removal, commonly used in the 2nd stage of filtration for the removal of:

    • Rust
    • Sand
    • Silt
    • Algae
    • Cryptosporidium cysts (>99% efficient for 1 micron cartridge)
Material is food grade polypropylene with no chemical residue or loose fibres.  Cartridges in the range suit  a variety of filter housing sizes.  Typically used on whole of house applications
Polyester Pleated cartridges offer practical filtration with the convenience of a cartridge filter and the economy of cleanabilty. High surface area pleated construction means longer run length, high flow rates, high dirt holding ability and low pressure drop, giving
the lowest cost per litre filtered. Once the cartridge gets dirty it can be cleaned under a tap or by gentle hosing. Severe cases can be soaked in diluted acid or other cleaners, appropriate to the deposits and then rinsed. Cartridges should be sterilised prior to re-use using bleach. Reusability means that the Polyester Pleated cartridges cost less to use than disposable depth type cartridges as they can be cleaned several times before replacement is required (note: 1 & 5 micron cartridges may only be cleanable
once or twice). 


There are no reviews for this product yet. Please write a review here.